Kernel Metadata Declaration — on demand
ISO 26324 asks a DOI Registration Agency to produce a Kernel Metadata Declaration for every DOI it issues. Give any DOI: its public record becomes a record in the Smart Scholars DOI Metadata Format (1.0, or 1.1 when it carries what 1.1 added on 9 Oct 2026), checked against every rule, and declared as the Kernel XML.
✓ Meets every rule of the format
The record below is complete and every controlled value is a DOI Attribute Value Set 2.3 spelling. The Declaration on the right follows DOIMetadataKernel.xsd element by element.
What the DOI identifies
Composites at Cryogenic Temperature
10.46243/jstj.2019.v4.i3.94 · JournalArticle — an article in a journal · Digital · Visual · Language · en
Published 2019-05-07
Part of Journal of Science & Technology · ISSN 2456-5660 · vol. 04 · no. 03 · pp. 64–65
Principal agents
- K.Siva Reddy (author → Author)
- Longman Publishers (publisher → Publisher)
Also in the record, outside the Kernel: the abstract, the licence, 4 links, 6 references. Source: Crossref (member 25296), registered 2026-09-07, last deposited 2026-10-15.
System metadata — ISO 26324:2025, Annex B · DOI Handbook 10.1
Each element by the standard's name and the Handbook's (in grey), read off the record.
| DOI Name DOI name | 10.46243/jstj.2019.v4.i3.94 |
| Referent Type referentType | Creation |
| Referent Sub-Type referentSubType | JournalArticle — an article in a journal |
| Referent Name(s) referentName(s) | Composites at Cryogenic Temperature (PrincipalTitle, en) |
| Basic Metadata basicMetadata | author: K.Siva Reddy publisher: Longman Publishers published: 2019-05-07 part of: Journal of Science & Technology · ISSN 2456-5660 · vol. 04 · no. 03 · pp. 64–65 language: en form: Digital · Visual · Language |
| Referent Identifier(s) alternateIdentifier(s) | none besides the DOI |
| Registration Authority registrationAuthorityCode | Crossref — issued by Crossref (member 25296); held here as a copy |
| Created Date issueDate | 2026-09-07 |
| relatedIdentifiers | none needed — the descriptive metadata is in this record |
The record
{
"format": "smartscholars-doi-metadata/1.1",
"doi": "10.46243/jstj.2019.v4.i3.94",
"referent": "Creation",
"type": "JournalArticle",
"structural_type": "Digital",
"modes": [
"Visual"
],
"characters": [
"Language"
],
"titles": [
{
"value": "Composites at Cryogenic Temperature",
"type": "PrincipalTitle",
"lang": "en"
}
],
"identifiers": [
{
"type": "DOI",
"value": "10.46243/jstj.2019.v4.i3.94"
}
],
"agents": [
{
"role": "author",
"name": {
"given": "",
"family": "K.Siva Reddy"
},
"sequence": "first",
"affiliations": [
{
"name": "Department of Mechanical Engineering, AIMS, Aushapur Hyderabad"
}
]
},
{
"role": "publisher",
"name": {
"org": "Longman Publishers"
}
}
],
"dates": {
"published": "2019-05-07",
"date_type": "PublicationDate",
"online": "2019-05-07"
},
"language": "en",
"container": {
"type": "Journal",
"titles": [
{
"value": "Journal of Science & Technology",
"type": "PrincipalTitle"
}
],
"identifiers": [
{
"type": "ISSN",
"value": "2456-5660",
"medium": "electronic"
}
],
"volume": "04",
"issue": "03",
"pages": {
"first": "64",
"last": "65"
}
},
"links": [
{
"url": "https://www.jst.org.in/index.php/pub/article/view/94",
"return_type": "text/html",
"primary": true
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/94/80",
"purpose": "text-mining",
"return_type": "application/pdf"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/94/3254",
"purpose": "text-mining",
"return_type": "application/xml"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/view/94/80",
"purpose": "similarity-checking"
}
],
"abstract": {
"value": "Fiber reinforced composites are class of materials that are workable engineering materials possessing high strength to weight ratio resulting in reduction of weight and hence savings in energy. Composites can be tailor -made to the required duty by changing the nature and proportion of the constituent materials. Composites exhibit anisotropy in mechanical and thermal properties. This makes the design of composite structures more complex and demanding. Composites have wide applications as supports and structures at cryogenic temperatures in super conducting magnets and as fuel tankage in spacecraft and rocketry. As these composites are fabricated at 1000 C to 2000 C, ~ their use at low temperatures creates thermal stresses. They become brittle at low temperatures and thermal strain of matrix ma:f be of the same order of the ultimate tensile strain at helium temperature (4.2K); thus leaving no more load bearing capability.",
"lang": "en"
},
"license": {
"url": "https://creativecommons.org/licenses/by/4.0/",
"start": "2019-05-07",
"applies_to": "vor"
},
"references": [
{
"key": "ref1",
"doi": "10.1002/cnm.1630030303",
"unstructured": "REDDY.J.N (1987) 'A generalization of two-dimensional theories of laminated composite plates', Commu.in Applied Num-methods, vol 3, 173-180"
},
{
"key": "ref2",
"doi": "10.1016/0263-8223(87)90080-8",
"unstructured": "DOONG.J.L, CHEN.J.J and CHEN.K.W (1987) 'Vibration and stability of an initially stressed laminated plates based on a higher-order deformation theory', Composite Structures, vol 7, No.4, 285-309"
},
{
"key": "ref3",
"doi": "10.1080/01495738708927002",
"unstructured": "MAHESH GUNDAPPA, THOMaS.Jr. and HASSEL MAN.D.P.H.(1987) 'An analysis of thermal stresses in flat plate subjected to conductive heat transfer with thermal boundary conductance', Jou. of thermal Sciences,vol...10,147-157"
},
{
"key": "ref4",
"doi": "10.1016/0045-7949(88)90147-2",
"unstructured": "KUMAR.K. THAMMA and SUDHIR.B. RAILKAR. (1988)' On heat-displacement based hybrid trans-finite element formulations for uncoupled/coupled thermally induced stress wave propagation', Composite Structures, vol:30, 1025-1036"
},
{
"key": "ref5",
"doi": "10.1080/01495738908961971",
"unstructured": "HUSSEIN.R, HA.K and FAIZO.P (1988) 'Thermal stresses in sandwich plates', Journal of Thermal Stresses, 12, 333-349. COOK.R.D. (1988) 'Concepts and applications of finite element analysis', John Wiley Sons publishing co., New York"
},
{
"key": "ref6",
"doi": "10.1016/0011-2275(90)90275-h",
"unstructured": "KASSEN.M.B. (1988) 'Cryogenic applications in composite technology in the USA', National Bureau of Standards, Colorado, USA. [7]MICHAEL.P.C, AllED.E, RABINOWIICl.E. and IWASA. Y (1990) 'Mechanical properties and static friction behaviour of epoxy mixes at room"
}
],
"crossmark": {
"policy": "10.46243/jst.crossmark-policy",
"domains": [
"www.jst.org.in"
],
"domain_exclusive": false
},
"record": {
"registrant": "Longman Publishers",
"registered": "2026-09-07",
"updated": "2026-10-15",
"issue_number": 1,
"source": "crossref-api",
"source_agency": "Crossref (member 25296)"
}
}The Kernel Metadata Declaration
DOIMetadataKernel.xsd · namespace http://www.doi.org/2010/DOISchema · Attribute Value Sets 2.3 · draft — the agency's DOI name is filled in on accreditation
<?xml version="1.0" encoding="UTF-8"?>
<!-- DRAFT declaration: Smart Scholars is not yet a DOI Registration Agency. registrationAgencyDoiName is a marker (10.0/ is no RA's prefix) and is filled in on accreditation. -->
<kernelMetadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.doi.org/2010/DOISchema https://www.doi.org/doi_schemas/DOIMetadataKernel.xsd" xmlns="http://www.doi.org/2010/DOISchema">
<referentDoiName>10.46243/jstj.2019.v4.i3.94</referentDoiName>
<primaryReferentType>Creation</primaryReferentType>
<registrationAgencyDoiName>10.0/smart-scholars-draft</registrationAgencyDoiName>
<issueDate>2026-11-20</issueDate>
<issueNumber>1</issueNumber>
<referentCreation>
<name primaryLanguage="en">
<value>Composites at Cryogenic Temperature</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>10.46243/jstj.2019.v4.i3.94</nonUriValue>
<uri returnType="text/html" doesContentNegotiation="true">https://doi.org/10.46243/jstj.2019.v4.i3.94</uri>
<type>DOI</type>
</identifier>
<identifier>
<uri returnType="text/html">https://www.jst.org.in/index.php/pub/article/view/94</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/download/94/80</uri>
<type>URI</type>
</identifier>
<identifier>
<uri returnType="application/xml">https://www.jst.org.in/index.php/pub/article/download/94/3254</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/view/94/80</uri>
<type>URI</type>
</identifier>
<structuralType>Digital</structuralType>
<mode>Visual</mode>
<character>Language</character>
<type>JournalArticle</type>
<principalAgent>
<name>
<value>K.Siva Reddy</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Longman Publishers</value>
<type>PrincipalName</type>
</name>
<role>Publisher</role>
</principalAgent>
<linkedCreation>
<name>
<value>Journal of Science & Technology</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>2456-5660</nonUriValue>
<type>ISSN</type>
</identifier>
<referentCreationRole>Part</referentCreationRole>
<referentCreationSequenceIdentifier>
<value>04</value>
<type>VolumeNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>03</value>
<type>IssueNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>64-65</value>
<type>PageNumber</type>
</referentCreationSequenceIdentifier>
</linkedCreation>
<language>en</language>
<languageOfReferentContent>
<language>en</language>
<languageOfReferentContentType>Original</languageOfReferentContentType>
</languageOfReferentContent>
<creationDate>
<date>2019-05-07</date>
<creationDateType>PublicationDate</creationDateType>
</creationDate>
</referentCreation>
</kernelMetadata>



