Kernel Metadata Declaration — on demand
ISO 26324 asks a DOI Registration Agency to produce a Kernel Metadata Declaration for every DOI it issues. Give any DOI: its public record becomes a record in the Smart Scholars DOI Metadata Format (1.0, or 1.1 when it carries what 1.1 added on 9 Oct 2026), checked against every rule, and declared as the Kernel XML.
✓ Meets every rule of the format
The record below is complete and every controlled value is a DOI Attribute Value Set 2.3 spelling. The Declaration on the right follows DOIMetadataKernel.xsd element by element.
What the DOI identifies
Improving Strength Properties Of Concrete Using Foundry Sand
10.46243/jstj.2017.v2.i6.44 · JournalArticle — an article in a journal · Digital · Visual · Language · en
Published 2017-11-28
Part of Journal of Science & Technology · ISSN 2456-5660 · vol. 02 · no. 06 · pp. 33–39
Principal agents
- R.Lavanya (author → Author)
- S.Kumarswamy (author → Author)
- Longman Publishers (publisher → Publisher)
Also in the record, outside the Kernel: the abstract, the licence, 4 links, 8 references. Source: Crossref (member 25296), registered 2026-09-07, last deposited 2026-10-15.
System metadata — ISO 26324:2025, Annex B · DOI Handbook 10.1
Each element by the standard's name and the Handbook's (in grey), read off the record.
| DOI Name DOI name | 10.46243/jstj.2017.v2.i6.44 |
| Referent Type referentType | Creation |
| Referent Sub-Type referentSubType | JournalArticle — an article in a journal |
| Referent Name(s) referentName(s) | Improving Strength Properties Of Concrete Using Foundry Sand (PrincipalTitle, en) |
| Basic Metadata basicMetadata | author: R.Lavanya author: S.Kumarswamy publisher: Longman Publishers published: 2017-11-28 part of: Journal of Science & Technology · ISSN 2456-5660 · vol. 02 · no. 06 · pp. 33–39 language: en form: Digital · Visual · Language |
| Referent Identifier(s) alternateIdentifier(s) | none besides the DOI |
| Registration Authority registrationAuthorityCode | Crossref — issued by Crossref (member 25296); held here as a copy |
| Created Date issueDate | 2026-09-07 |
| relatedIdentifiers | none needed — the descriptive metadata is in this record |
The record
{
"format": "smartscholars-doi-metadata/1.1",
"doi": "10.46243/jstj.2017.v2.i6.44",
"referent": "Creation",
"type": "JournalArticle",
"structural_type": "Digital",
"modes": [
"Visual"
],
"characters": [
"Language"
],
"titles": [
{
"value": "Improving Strength Properties Of Concrete Using Foundry Sand",
"type": "PrincipalTitle",
"lang": "en"
}
],
"identifiers": [
{
"type": "DOI",
"value": "10.46243/jstj.2017.v2.i6.44"
}
],
"agents": [
{
"role": "author",
"name": {
"given": "",
"family": "R.Lavanya"
},
"sequence": "first",
"affiliations": [
{
"name": "Samskruti College of engineering and technology, Hyderabad - 501301"
}
]
},
{
"role": "author",
"name": {
"given": "",
"family": "S.Kumarswamy"
},
"sequence": "additional",
"affiliations": [
{
"name": "Samskruti College of engineering and technology, Hyderabad - 501301"
}
]
},
{
"role": "publisher",
"name": {
"org": "Longman Publishers"
}
}
],
"dates": {
"published": "2017-11-28",
"date_type": "PublicationDate",
"online": "2017-11-28"
},
"language": "en",
"container": {
"type": "Journal",
"titles": [
{
"value": "Journal of Science & Technology",
"type": "PrincipalTitle"
}
],
"identifiers": [
{
"type": "ISSN",
"value": "2456-5660",
"medium": "electronic"
}
],
"volume": "02",
"issue": "06",
"pages": {
"first": "33",
"last": "39"
}
},
"links": [
{
"url": "https://www.jst.org.in/index.php/pub/article/view/44",
"return_type": "text/html",
"primary": true
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/44/34",
"purpose": "text-mining",
"return_type": "application/pdf"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/44/3461",
"purpose": "text-mining",
"return_type": "application/xml"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/view/44/34",
"purpose": "similarity-checking"
}
],
"abstract": {
"value": "In the previous couple of years varied analysis and modification has been done to provide concrete that has the required properties. Concrete is one in all the foremost common materials utilized in the development trade. This space of analysis within the concrete was introducing manufactory sand within the standard concrete. Generation of waste manufactory sand as byproduct of the metal casting industries causes environmental issues attributable to its correct disposal. Therefore its usage in building materials, construction and in different fields is crucial for reduction of environmental issues. This analysis was applied to provide AN eco –friendly concrete. This paper demonstrates the doable use of waste manufactory sand as a partial replacement by finemixture. AN experimental investigation was applied on concrete containing waste manufactory sand within the vary of (0%, 10%, 20%, 30%, and 40%) by the burden for M30 grade of concrete. Material was tested and compared with typical concrete in terms of strength. These tests were applied on customary cube, cylinder and beam for seven and fourteen and twenty eight days to work out the properties of concrete. The aim of this analysis was to grasp the behavior and strength properties of concrete once addition of manufactory sand in numerous proportion by tests like compressive strength by cube specimen, split tensile by cylindrical specimen and flexural strength by beam model. The analysis was a resource for exploring the potential use of manufactory sand as another to virgin rawmaterials.",
"lang": "en"
},
"license": {
"url": "https://creativecommons.org/licenses/by/4.0/",
"start": "2017-11-28",
"applies_to": "vor"
},
"references": [
{
"key": "ref1",
"doi": "10.1016/j.conbuildmat.2008.05.005",
"unstructured": "Rafat siddique, Geert de Schutter, Albert Noumowe, (2008), “Effect of Used–Foundry Sand on the Mechanical Properties of Concrete”, Construction and Building Materials, vol.23, pp 976–980"
},
{
"key": "ref2",
"doi": "10.1016/j.conbuildmat.2010.11.065",
"unstructured": "Yogesh Aggarwal, Paratibha Aggarwal, Rafat Siddique, EI–Hadi kadri and rachid bennacer, (2010), “Strength, Durability, And Micro–Structural Properties Of Concrete Made With Used–Foundry Sand (UFS)” Construction And Building Materials, Vol.25, pp 1916–1925"
},
{
"key": "ref3",
"doi": "10.1016/j.conbuildmat.2011.06.041",
"unstructured": "Gupreet Singh and Rafat Siddique, (2011), “Effect of Waste Foundry Sand (WFS) As Partial Replacement of Sand on Strength, Ultrasonic Pulse Velocity and Permeability of Concrete”, Construction and Building Materials, vol.26, pp 416–422"
},
{
"key": "ref4",
"doi": "10.14359/10612",
"unstructured": "Khatib JM, EII is DJ,.(2001), “Mechanical Properties Of Concrete Containing Foundry Sand”. ACI Special Publication (sp–200), American Concrete Institute; pp. 733–748"
},
{
"key": "ref5",
"unstructured": "Siddique R., Gupta R, kaur i., (2007), “Effect of Spent Foundry Sand as Partial Replacement of Fine Aggregate on the Properties of Concrete”. In: 22 and International Conference On Solid Waste Technology And Management, Widener University, Philadelphia, USA"
},
{
"key": "ref6",
"doi": "10.1016/j.conbuildmat.2011.08.091",
"unstructured": "Gurdeep Kaur, Anita Rajor and Rafat Siddique, (2011), “Properties of Concrete Containing Fungal Treated Waste Foundry Sand”, Construction and Building Materials, vol. 29, PP 82–87"
},
{
"key": "ref7",
"doi": "10.1007/bf01191976",
"unstructured": "Dunster, A.M., Parsonage, J.R., Thomas, M.J.K., (1999). “Pozzolonic Reaction of Metakaolinite Its Effects On Portland Cement Hydration”. Journal Of Material Science. Pp 1345–1350"
},
{
"key": "ref8",
"unstructured": "American foundrymen’s society (1991). “Alternative utilization of foundry waste sand”. Final report (phase I) prepared by American foundry men’s society. e"
}
],
"crossmark": {
"policy": "10.46243/jst.crossmark-policy",
"domains": [
"www.jst.org.in"
],
"domain_exclusive": false
},
"record": {
"registrant": "Longman Publishers",
"registered": "2026-09-07",
"updated": "2026-10-15",
"issue_number": 1,
"source": "crossref-api",
"source_agency": "Crossref (member 25296)"
}
}The Kernel Metadata Declaration
DOIMetadataKernel.xsd · namespace http://www.doi.org/2010/DOISchema · Attribute Value Sets 2.3 · draft — the agency's DOI name is filled in on accreditation
<?xml version="1.0" encoding="UTF-8"?>
<!-- DRAFT declaration: Smart Scholars is not yet a DOI Registration Agency. registrationAgencyDoiName is a marker (10.0/ is no RA's prefix) and is filled in on accreditation. -->
<kernelMetadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.doi.org/2010/DOISchema https://www.doi.org/doi_schemas/DOIMetadataKernel.xsd" xmlns="http://www.doi.org/2010/DOISchema">
<referentDoiName>10.46243/jstj.2017.v2.i6.44</referentDoiName>
<primaryReferentType>Creation</primaryReferentType>
<registrationAgencyDoiName>10.0/smart-scholars-draft</registrationAgencyDoiName>
<issueDate>2026-11-18</issueDate>
<issueNumber>1</issueNumber>
<referentCreation>
<name primaryLanguage="en">
<value>Improving Strength Properties Of Concrete Using Foundry Sand</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>10.46243/jstj.2017.v2.i6.44</nonUriValue>
<uri returnType="text/html" doesContentNegotiation="true">https://doi.org/10.46243/jstj.2017.v2.i6.44</uri>
<type>DOI</type>
</identifier>
<identifier>
<uri returnType="text/html">https://www.jst.org.in/index.php/pub/article/view/44</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/download/44/34</uri>
<type>URI</type>
</identifier>
<identifier>
<uri returnType="application/xml">https://www.jst.org.in/index.php/pub/article/download/44/3461</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/view/44/34</uri>
<type>URI</type>
</identifier>
<structuralType>Digital</structuralType>
<mode>Visual</mode>
<character>Language</character>
<type>JournalArticle</type>
<principalAgent>
<name>
<value>R.Lavanya</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>S.Kumarswamy</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Longman Publishers</value>
<type>PrincipalName</type>
</name>
<role>Publisher</role>
</principalAgent>
<linkedCreation>
<name>
<value>Journal of Science & Technology</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>2456-5660</nonUriValue>
<type>ISSN</type>
</identifier>
<referentCreationRole>Part</referentCreationRole>
<referentCreationSequenceIdentifier>
<value>02</value>
<type>VolumeNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>06</value>
<type>IssueNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>33-39</value>
<type>PageNumber</type>
</referentCreationSequenceIdentifier>
</linkedCreation>
<language>en</language>
<languageOfReferentContent>
<language>en</language>
<languageOfReferentContentType>Original</languageOfReferentContentType>
</languageOfReferentContent>
<creationDate>
<date>2017-11-28</date>
<creationDateType>PublicationDate</creationDateType>
</creationDate>
</referentCreation>
</kernelMetadata>



