Kernel Metadata Declaration — on demand
ISO 26324 asks a DOI Registration Agency to produce a Kernel Metadata Declaration for every DOI it issues. Give any DOI: its public record becomes a record in the Smart Scholars DOI Metadata Format 1.0, checked against every rule, and declared as the Kernel XML.
✓ Meets every rule of the format
The record below is complete and every controlled value is a DOI Attribute Value Set 2.3 spelling. The Declaration on the right follows DOIMetadataKernel.xsd element by element.
What the DOI identifies
Using Stadd Pro: Building Design And Analysis
10.46243/jstj.2017.v2.i3.136 · JournalArticle — an article in a journal · Digital · Visual · Language · en
Published 2017-05-08
Part of Journal of Science & Technology · ISSN 2456-5660 · vol. 02 · no. 03 · pp. 27–33
Principal agents
- J.Mohan (author → Author)
- C. Selin Ravikumar (author → Author)
- T.S.Thandavamoorthy (author → Author)
- Longman Publishers (publisher → Publisher)
Also in the record, outside the Kernel: the abstract, the licence, 4 links, 10 references. Source: Crossref (member 25296), registered 2026-09-07, last deposited 2026-09-20.
System metadata — ISO 26324:2025, Annex B · DOI Handbook 10.1
Each element by the standard's name and the Handbook's (in grey), read off the record.
| DOI Name DOI name | 10.46243/jstj.2017.v2.i3.136 |
| Referent Type referentType | Creation |
| Referent Sub-Type referentSubType | JournalArticle — an article in a journal |
| Referent Name(s) referentName(s) | Using Stadd Pro: Building Design And Analysis (PrincipalTitle, en) |
| Basic Metadata basicMetadata | author: J.Mohan author: C. Selin Ravikumar author: T.S.Thandavamoorthy publisher: Longman Publishers published: 2017-05-08 part of: Journal of Science & Technology · ISSN 2456-5660 · vol. 02 · no. 03 · pp. 27–33 language: en form: Digital · Visual · Language |
| Referent Identifier(s) alternateIdentifier(s) | none besides the DOI |
| Registration Authority registrationAuthorityCode | Crossref — issued by Crossref (member 25296); held here as a copy |
| Created Date issueDate | 2026-09-07 |
| relatedIdentifiers | none needed — the descriptive metadata is in this record |
The record
{
"format": "smartscholars-doi-metadata/1.0",
"doi": "10.46243/jstj.2017.v2.i3.136",
"referent": "Creation",
"type": "JournalArticle",
"structural_type": "Digital",
"modes": [
"Visual"
],
"characters": [
"Language"
],
"titles": [
{
"value": "Using Stadd Pro: Building Design And Analysis",
"type": "PrincipalTitle",
"lang": "en"
}
],
"identifiers": [
{
"type": "DOI",
"value": "10.46243/jstj.2017.v2.i3.136"
}
],
"agents": [
{
"role": "author",
"name": {
"given": "",
"family": "J.Mohan"
},
"sequence": "first"
},
{
"role": "author",
"name": {
"given": "",
"family": "C. Selin Ravikumar"
},
"sequence": "additional"
},
{
"role": "author",
"name": {
"given": "",
"family": "T.S.Thandavamoorthy"
},
"sequence": "additional"
},
{
"role": "publisher",
"name": {
"org": "Longman Publishers"
}
}
],
"dates": {
"published": "2017-05-08",
"date_type": "PublicationDate",
"online": "2017-05-08"
},
"language": "en",
"container": {
"type": "Journal",
"titles": [
{
"value": "Journal of Science & Technology",
"type": "PrincipalTitle"
}
],
"identifiers": [
{
"type": "ISSN",
"value": "2456-5660",
"medium": "electronic"
}
],
"volume": "02",
"issue": "03",
"pages": {
"first": "27",
"last": "33"
}
},
"links": [
{
"url": "https://www.jst.org.in/index.php/pub/article/view/136",
"return_type": "text/html",
"primary": true
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/136/114",
"purpose": "text-mining",
"return_type": "application/pdf"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/136/3563",
"purpose": "text-mining",
"return_type": "application/xml"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/view/136/114",
"purpose": "similarity-checking"
}
],
"abstract": {
"value": "The design of modern civil engineering structures is highly complicat ed and the basic design is very important on various aspects. The design involves load calculations manually and analysis of the whole structure by STAAD Pro. The design ways utilized in STAAD-Pro analysis square measure Limit State style conformist to Indian customaryCode of follow. STAADpro options state of the art programme, visual image tools, powerful analysis and style engines with advanced finite part (FEM) and dynamic analysis capabilities.STAAD Beava STAAD Advance Analysis STAAD (X) Tower RM Bridge LEAP Bridge. From model generation, analysis and design to visualization and result verification, STAAD.Pro is a professional’s choice. In this paper the writers analyzed and designed a G+5 storey building by considering dead, live, and wind loads. The writers further considered a 3 -D RCC frame with 5 bays in x -axis and 4 bays in z -axis. The y -axis consisted of G+5 floors. The floor height was 3 m. The structure was subjected to self weight, dead load, live load, and wind load p rescribed under various load cases presented in the paper. The writers also checked the deflection of different members under the given loading combinations. The design of the building relies upon the minimum needs as prescribed within the Indian customary Codes. The minimum needs bearing on the structural safety of buildings ar being lined by method of birth down minimum stylehundreds that got to be assumed for dead loads, imposed loads, and other external loads, the structure would be required to bear. St rict conformity to loading standards recommended to the IS codes was adhered to",
"lang": "en"
},
"license": {
"url": "https://creativecommons.org/licenses/by/4.0/",
"start": "2017-05-08",
"applies_to": "vor"
},
"references": [
{
"key": "ref1",
"unstructured": "Aman, Manjunath Nalwadgi, Vishal, T, Gajendra, “Analysis and design of multistorey building by using"
},
{
"key": "ref2",
"unstructured": "STAAD Pro”, International Research Journal of Engineering and Technology (IRJET) Volume 03, No: 06"
},
{
"key": "ref3",
"unstructured": "Varalakshmi, V., Shiva Kumar, G. and Sunil Sarma, R., “Analysis and design of G+5 residential building,”"
},
{
"key": "ref4",
"unstructured": "Mini Project Report, Marri Laxman Reddy Institute of Technology and Management, Dundigal, Hyderabad"
},
{
"key": "ref5",
"unstructured": "Jayachandran, . P. and Rajasekaran, S., .Structural Design of Multi-story Residential Building in Salem"
},
{
"key": "ref6",
"unstructured": "India,” Mini Project Report, PSG College of Technology, Coimbatore, Tamil Nadu, India, 2006"
},
{
"key": "ref7",
"unstructured": "IS 456-2000 (Design of RCC structural elements )"
},
{
"key": "ref8",
"unstructured": "IS 875-Part 1 (Dead Load )"
},
{
"key": "ref9",
"unstructured": "IS 875-Part 2 (Live Load )"
},
{
"key": "ref10",
"unstructured": "SP-16 (Depth and Percentage of Reinforcement)"
}
],
"record": {
"registrant": "Longman Publishers",
"registered": "2026-09-07",
"updated": "2026-09-20",
"issue_number": 1,
"source": "crossref-api",
"source_agency": "Crossref (member 25296)"
}
}The Kernel Metadata Declaration
DOIMetadataKernel.xsd · namespace http://www.doi.org/2010/DOISchema · Attribute Value Sets 2.3 · draft — the agency's DOI name is filled in on accreditation
<?xml version="1.0" encoding="UTF-8"?>
<!-- DRAFT declaration: Smart Scholars is not yet a DOI Registration Agency. registrationAgencyDoiName is a marker (10.0/ is no RA's prefix) and is filled in on accreditation. -->
<kernelMetadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.doi.org/2010/DOISchema https://www.doi.org/doi_schemas/DOIMetadataKernel.xsd" xmlns="http://www.doi.org/2010/DOISchema">
<referentDoiName>10.46243/jstj.2017.v2.i3.136</referentDoiName>
<primaryReferentType>Creation</primaryReferentType>
<registrationAgencyDoiName>10.0/smart-scholars-draft</registrationAgencyDoiName>
<issueDate>2026-10-04</issueDate>
<issueNumber>1</issueNumber>
<referentCreation>
<name primaryLanguage="en">
<value>Using Stadd Pro: Building Design And Analysis</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>10.46243/jstj.2017.v2.i3.136</nonUriValue>
<uri returnType="text/html" doesContentNegotiation="true">https://doi.org/10.46243/jstj.2017.v2.i3.136</uri>
<type>DOI</type>
</identifier>
<identifier>
<uri returnType="text/html">https://www.jst.org.in/index.php/pub/article/view/136</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/download/136/114</uri>
<type>URI</type>
</identifier>
<identifier>
<uri returnType="application/xml">https://www.jst.org.in/index.php/pub/article/download/136/3563</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/view/136/114</uri>
<type>URI</type>
</identifier>
<structuralType>Digital</structuralType>
<mode>Visual</mode>
<character>Language</character>
<type>JournalArticle</type>
<principalAgent>
<name>
<value>J.Mohan</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>C. Selin Ravikumar</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>T.S.Thandavamoorthy</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Longman Publishers</value>
<type>PrincipalName</type>
</name>
<role>Publisher</role>
</principalAgent>
<linkedCreation>
<name>
<value>Journal of Science & Technology</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>2456-5660</nonUriValue>
<type>ISSN</type>
</identifier>
<referentCreationRole>Part</referentCreationRole>
<referentCreationSequenceIdentifier>
<value>02</value>
<type>VolumeNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>03</value>
<type>IssueNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>27-33</value>
<type>PageNumber</type>
</referentCreationSequenceIdentifier>
</linkedCreation>
<language>en</language>
<languageOfReferentContent>
<language>en</language>
<languageOfReferentContentType>Original</languageOfReferentContentType>
</languageOfReferentContent>
<creationDate>
<date>2017-05-08</date>
<creationDateType>PublicationDate</creationDateType>
</creationDate>
</referentCreation>
</kernelMetadata>
