Kernel Metadata Declaration — on demand
ISO 26324 asks a DOI Registration Agency to produce a Kernel Metadata Declaration for every DOI it issues. Give any DOI: its public record becomes a record in the Smart Scholars DOI Metadata Format (1.0, or 1.1 when it carries what 1.1 added on 9 Oct 2026), checked against every rule, and declared as the Kernel XML.
✓ Meets every rule of the format
The record below is complete and every controlled value is a DOI Attribute Value Set 2.3 spelling. The Declaration on the right follows DOIMetadataKernel.xsd element by element.
What the DOI identifies
Three-Dimensional (3D) Food Printing: Technology, Applications, and Ethical Considerations
10.46243/jst.2025.v10.i12.pp35-41 · JournalArticle — an article in a journal · Digital · Visual · Language · en
Published 2025-12-15
Part of Journal of Science & Technology · ISSN 2456-5660 · vol. 10 · no. 12 · pp. 35
Principal agents
- Manasa Mandapati (author → Author) · ORCID 0009-0003-2056-724X
- Longman Publishers (publisher → Publisher)
Also in the record, outside the Kernel: the abstract, the licence, 3 links, 11 references. Source: Crossref (member 25296), registered 2025-12-26, last deposited 2026-10-07.
System metadata — ISO 26324:2025, Annex B · DOI Handbook 10.1
Each element by the standard's name and the Handbook's (in grey), read off the record.
| DOI Name DOI name | 10.46243/jst.2025.v10.i12.pp35-41 |
| Referent Type referentType | Creation |
| Referent Sub-Type referentSubType | JournalArticle — an article in a journal |
| Referent Name(s) referentName(s) | Three-Dimensional (3D) Food Printing: Technology, Applications, and Ethical Considerations (PrincipalTitle, en) |
| Basic Metadata basicMetadata | author: Manasa Mandapati publisher: Longman Publishers published: 2025-12-15 part of: Journal of Science & Technology · ISSN 2456-5660 · vol. 10 · no. 12 · pp. 35 language: en form: Digital · Visual · Language |
| Referent Identifier(s) alternateIdentifier(s) | none besides the DOI |
| Registration Authority registrationAuthorityCode | Crossref — issued by Crossref (member 25296); held here as a copy |
| Created Date issueDate | 2025-12-26 |
| relatedIdentifiers | none needed — the descriptive metadata is in this record |
The record
{
"format": "smartscholars-doi-metadata/1.1",
"doi": "10.46243/jst.2025.v10.i12.pp35-41",
"referent": "Creation",
"type": "JournalArticle",
"structural_type": "Digital",
"modes": [
"Visual"
],
"characters": [
"Language"
],
"titles": [
{
"value": "Three-Dimensional (3D) Food Printing: Technology, Applications, and Ethical Considerations",
"type": "PrincipalTitle",
"lang": "en"
}
],
"identifiers": [
{
"type": "DOI",
"value": "10.46243/jst.2025.v10.i12.pp35-41"
}
],
"agents": [
{
"role": "author",
"name": {
"given": "",
"family": "Manasa Mandapati"
},
"sequence": "first",
"identifiers": [
{
"type": "ORCID",
"value": "0009-0003-2056-724X",
"verified": false
}
]
},
{
"role": "publisher",
"name": {
"org": "Longman Publishers"
}
}
],
"dates": {
"published": "2025-12-15",
"date_type": "PublicationDate",
"online": "2025-12-15"
},
"language": "en",
"container": {
"type": "Journal",
"titles": [
{
"value": "Journal of Science & Technology",
"type": "PrincipalTitle"
}
],
"identifiers": [
{
"type": "ISSN",
"value": "2456-5660",
"medium": "electronic"
}
],
"volume": "10",
"issue": "12",
"pages": {
"first": "35"
}
},
"links": [
{
"url": "https://www.jst.org.in/index.php/pub/article/view/1445",
"return_type": "text/html",
"primary": true
},
{
"url": "https://jst.org.in/index.php/pub/article/download/1445/1032",
"purpose": "text-mining",
"return_type": "application/pdf"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/1445/1032",
"purpose": "similarity-checking"
}
],
"abstract": {
"value": "Three-dimensional (3D) food printing is an emerging additive manufacturing technology that constructs edible products layer by layer from digital designs. It promises unprecedented customization of food shape, texture, and nutritional content, with potential applications ranging from personalized diets to novel culinary experiences. For example, this technology can create appealing texture foods for patients with swallowing difficulties and incorporate byproducts (e.g. unshaped produce or insect protein) to reduce waste. Key benefits include tailored nutrient profiles, creative presentation, on-demand production, and supply chain flexibility. However, significant challenges remain maintaining nutrient density during processing, ensuring food safety, consumer acceptance of “printed” foods, and developing appropriate regulatory frameworks.",
"lang": "en"
},
"license": {
"url": "https://creativecommons.org/licenses/by/4.0",
"start": "2025-12-15",
"applies_to": "vor"
},
"references": [
{
"key": "ref1",
"doi": "10.1016/j.promfg.2015.09.057",
"unstructured": "Sun, Jie & Peng, Zhuo & Zhou, Weibiao & Fuh, J. & Hong, Geok-Soon & Chiu, Annette. (2015). A Review on 3D Printing for Customized Food Fabrication. Procedia Manufacturing. 1. 308-"
},
{
"key": "ref2",
"doi": "10.1016/j.promfg.2015.09.057",
"unstructured": "10.1016/j.promfg.2015.09.057"
},
{
"key": "ref3",
"doi": "10.1038/s41538-023-00182-6",
"unstructured": "Blutinger, J.D., Cooper, C.C., Karthik, S. et al. The future of software-controlled cooking. npj Sci Food 7, 6 ( 2 0 2 3). https://doi.org/10.1038/s41538-023-00182-6"
},
{
"key": "ref4",
"doi": "10.3390/foods12173287",
"unstructured": "Zhu, W., Iskandar, M. M., Baeghbali, V., & Kubow, S. (2023). Three-Dimensional Printing of Foods: A Critical Review of the Present State in Healthcare Applications, and Potential Risks and Benefits. Foods, 12(17), 3287. https:// doi.org/10.3390/foods12173287"
},
{
"key": "ref5",
"doi": "10.1017/s0029665123003002",
"unstructured": "Zhong L, Lewis JR, Sim M, et al. Threedimensional food printing: its readiness for a food and nutrition insecure world. Proceedings of the Nutrition Society. 2023;82(4):468-477. doi:10.1017/S0029665123003002"
},
{
"key": "ref6",
"doi": "10.1108/bfj-05-2020-0441",
"unstructured": "Burke-Shyne, S., Gallegos, D., & Williams, T. (2021). 3D food printing: Nutrition opportunities and challenges. British Food Journal, 123(2), 649-663"
},
{
"key": "ref7",
"doi": "10.3389/frfst.2025.1607449",
"unstructured": "Prithviraj V, Díaz LP, Lemus-Mondaca R, Ullah A and Roopesh MS (2025) Emerging advancements in 3D food printing. Front. Food Sci. Technol. 5:1607449. doi: 10.3389/ frfst.2025.1607449"
},
{
"key": "ref8",
"doi": "10.1038/s41538-024-00296-5",
"unstructured": "Derossi, A., Spence, C., Corradini, M.G. et al. Personalized, digitally designed 3D printed food towards the reshaping of food manufacturing and consumption. npj Sci Food 8, 54 (2024). https://doi.org/10.1038/s41538-024-00296-5"
},
{
"key": "ref9",
"doi": "10.1080/10408398.2022.2077299",
"unstructured": "Enfield, R. E., Pandya, J. K., Lu, J., McClements, D. J., & Kinchla, A. J. (2023). The future of 3D food printing: Opportunities for space applications. Critical Reviews in Food Science and Nutrition, 63(29), 10079-10092"
},
{
"key": "ref10",
"doi": "10.1016/j.lssr.2023.08.002",
"unstructured": "Santhoshkumar, P., Negi, A., & Moses, J. A. (2024). 3D printing for space food applications: advancements, challenges, and prospects. Life sciences in space research, 40, 158-165"
},
{
"key": "ref11",
"doi": "10.1057/s41599-025-05916-3",
"unstructured": "Mudau, M. K., & Adebo, O. A. (2025). Modeling the intention to accept 3D-printed foods: The role of religious beliefs, food neophobia and food technology neophobia. Humanities and Social Sciences Communications, 12, Article 59. https://doi.org/10.1057/s41599-025-05916-3"
}
],
"crossmark": {
"policy": "10.46243/jst.crossmark-policy",
"domains": [
"www.jst.org.in"
],
"domain_exclusive": false
},
"record": {
"registrant": "Longman Publishers",
"registered": "2025-12-26",
"updated": "2026-10-07",
"issue_number": 1,
"source": "crossref-api",
"source_agency": "Crossref (member 25296)"
}
}The Kernel Metadata Declaration
DOIMetadataKernel.xsd · namespace http://www.doi.org/2010/DOISchema · Attribute Value Sets 2.3 · draft — the agency's DOI name is filled in on accreditation
<?xml version="1.0" encoding="UTF-8"?>
<!-- DRAFT declaration: Smart Scholars is not yet a DOI Registration Agency. registrationAgencyDoiName is a marker (10.0/ is no RA's prefix) and is filled in on accreditation. -->
<kernelMetadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.doi.org/2010/DOISchema https://www.doi.org/doi_schemas/DOIMetadataKernel.xsd" xmlns="http://www.doi.org/2010/DOISchema">
<referentDoiName>10.46243/jst.2025.v10.i12.pp35-41</referentDoiName>
<primaryReferentType>Creation</primaryReferentType>
<registrationAgencyDoiName>10.0/smart-scholars-draft</registrationAgencyDoiName>
<issueDate>2026-11-18</issueDate>
<issueNumber>1</issueNumber>
<referentCreation>
<name primaryLanguage="en">
<value>Three-Dimensional (3D) Food Printing: Technology, Applications, and Ethical Considerations</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>10.46243/jst.2025.v10.i12.pp35-41</nonUriValue>
<uri returnType="text/html" doesContentNegotiation="true">https://doi.org/10.46243/jst.2025.v10.i12.pp35-41</uri>
<type>DOI</type>
</identifier>
<identifier>
<uri returnType="text/html">https://www.jst.org.in/index.php/pub/article/view/1445</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://jst.org.in/index.php/pub/article/download/1445/1032</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/download/1445/1032</uri>
<type>URI</type>
</identifier>
<structuralType>Digital</structuralType>
<mode>Visual</mode>
<character>Language</character>
<type>JournalArticle</type>
<principalAgent>
<name>
<value>Manasa Mandapati</value>
<type>PrincipalName</type>
</name>
<identifier>
<nonUriValue>0009-0003-2056-724X</nonUriValue>
<uri returnType="text/html">https://orcid.org/0009-0003-2056-724X</uri>
<type>ORCID</type>
</identifier>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Longman Publishers</value>
<type>PrincipalName</type>
</name>
<role>Publisher</role>
</principalAgent>
<linkedCreation>
<name>
<value>Journal of Science & Technology</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>2456-5660</nonUriValue>
<type>ISSN</type>
</identifier>
<referentCreationRole>Part</referentCreationRole>
<referentCreationSequenceIdentifier>
<value>10</value>
<type>VolumeNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>12</value>
<type>IssueNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>35</value>
<type>PageNumber</type>
</referentCreationSequenceIdentifier>
</linkedCreation>
<language>en</language>
<languageOfReferentContent>
<language>en</language>
<languageOfReferentContentType>Original</languageOfReferentContentType>
</languageOfReferentContent>
<creationDate>
<date>2025-12-15</date>
<creationDateType>PublicationDate</creationDateType>
</creationDate>
</referentCreation>
</kernelMetadata>



