Kernel Metadata Declaration — on demand
ISO 26324 asks a DOI Registration Agency to produce a Kernel Metadata Declaration for every DOI it issues. Give any DOI: its public record becomes a record in the Smart Scholars DOI Metadata Format 1.0, checked against every rule, and declared as the Kernel XML.
✓ Meets every rule of the format
The record below is complete and every controlled value is a DOI Attribute Value Set 2.3 spelling. The Declaration on the right follows DOIMetadataKernel.xsd element by element.
What the DOI identifies
Design, Structure and Fabrication of Exotic Flexible Materials in IoT and Wearable Application
10.46243/jst.2021.v6.i05.pp07-11 · JournalArticle — an article in a journal · Digital · Visual · Language · en
Published 2021-09-14
Part of Journal of Science & Technology · ISSN 2456-5660 · vol. 06 · no. 05 · pp. 07–11
Principal agents
- Amita Agnihotri (author → Author)
- Shafali Jagga (author → Author)
- Shalini Singh (author → Author)
- Longman Publishers (publisher → Publisher)
Also in the record, outside the Kernel: the abstract, the licence, 4 links, 8 references. Source: Crossref (member 25296), registered 2026-09-12, last deposited 2026-09-20.
System metadata — ISO 26324:2025, Annex B · DOI Handbook 10.1
Each element by the standard's name and the Handbook's (in grey), read off the record.
| DOI Name DOI name | 10.46243/jst.2021.v6.i05.pp07-11 |
| Referent Type referentType | Creation |
| Referent Sub-Type referentSubType | JournalArticle — an article in a journal |
| Referent Name(s) referentName(s) | Design, Structure and Fabrication of Exotic Flexible Materials in IoT and Wearable Application (PrincipalTitle, en) |
| Basic Metadata basicMetadata | author: Amita Agnihotri author: Shafali Jagga author: Shalini Singh publisher: Longman Publishers published: 2021-09-14 part of: Journal of Science & Technology · ISSN 2456-5660 · vol. 06 · no. 05 · pp. 07–11 language: en form: Digital · Visual · Language |
| Referent Identifier(s) alternateIdentifier(s) | none besides the DOI |
| Registration Authority registrationAuthorityCode | Crossref — issued by Crossref (member 25296); held here as a copy |
| Created Date issueDate | 2026-09-12 |
| relatedIdentifiers | none needed — the descriptive metadata is in this record |
The record
{
"format": "smartscholars-doi-metadata/1.0",
"doi": "10.46243/jst.2021.v6.i05.pp07-11",
"referent": "Creation",
"type": "JournalArticle",
"structural_type": "Digital",
"modes": [
"Visual"
],
"characters": [
"Language"
],
"titles": [
{
"value": "Design, Structure and Fabrication of Exotic Flexible Materials in IoT and Wearable Application",
"type": "PrincipalTitle",
"lang": "en"
}
],
"identifiers": [
{
"type": "DOI",
"value": "10.46243/jst.2021.v6.i05.pp07-11"
}
],
"agents": [
{
"role": "author",
"name": {
"given": "Amita",
"family": "Agnihotri"
},
"sequence": "first"
},
{
"role": "author",
"name": {
"given": "Shafali",
"family": "Jagga"
},
"sequence": "additional"
},
{
"role": "author",
"name": {
"given": "Shalini",
"family": "Singh"
},
"sequence": "additional"
},
{
"role": "publisher",
"name": {
"org": "Longman Publishers"
}
}
],
"dates": {
"published": "2021-09-14",
"date_type": "PublicationDate",
"online": "2021-09-14"
},
"language": "en",
"container": {
"type": "Journal",
"titles": [
{
"value": "Journal of Science & Technology",
"type": "PrincipalTitle"
}
],
"identifiers": [
{
"type": "ISSN",
"value": "2456-5660",
"medium": "electronic"
}
],
"volume": "06",
"issue": "05",
"pages": {
"first": "07",
"last": "11"
}
},
"links": [
{
"url": "https://www.jst.org.in/index.php/pub/article/view/919",
"return_type": "text/html",
"primary": true
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/919/846",
"purpose": "text-mining",
"return_type": "application/pdf"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/download/919/2597",
"purpose": "text-mining",
"return_type": "application/xml"
},
{
"url": "https://www.jst.org.in/index.php/pub/article/view/919/846",
"purpose": "similarity-checking"
}
],
"abstract": {
"value": "Flexible electronics, also known as flex circuits, is a technology for assembling electronic circuits by mounting electronic devices on flexible plastic substrates. Flexible electronics based upon organic and inorganic nano-structured materials have the identical features required for IoT. In this paper the recent progress in research and the future prospects of flexible electronics is discussed then key technologies, including flexible RFID, sensor, memory and display technologies are also described in detail. The paper will also focus on future scope and applications of these fantastic materials",
"lang": "en"
},
"license": {
"url": "https://creativecommons.org/licenses/by/4.0/",
"start": "2021-09-14",
"applies_to": "vor"
},
"references": [
{
"key": "ref1",
"doi": "10.1109/mcom.2018.1701310",
"unstructured": "Wang, D., Chen, D., Song, B., Guizani N.,Yu X., Du X., “The Next Generation IoT-Based Intelligent Algorithms and 5G Technologies”, IEEE Community Magazine, issue 56, 114–120, 2018"
},
{
"key": "ref2",
"doi": "10.1039/c3tc31765j",
"unstructured": "Zhan, Y., Mei, Y., Zheng, L, “Materials capability and device performance in flexible electronics for the Internet of Things”, J. Mater. Chem. C, 2, 1220–1232, 2014"
},
{
"key": "ref3",
"doi": "10.3390/s18020645",
"unstructured": "Liu, Y., Wang, H., Zhao, W., Zhang, M., Qin, H., Xie Y, “Flexible, Stretchable Sensors for Wearable Health Monitoring: Sensing Mechanisms, Materials, Fabrication Strategies and Features”, Sensors,18, 645, 2018"
},
{
"key": "ref4",
"doi": "10.3390/mi11090841",
"unstructured": "Kirtania S.G., Riheen M.A., Kim, S.U. Sekhar, K., Wisniewska A., Sekhar, P.K., “Inkjet Printing on a New Flexible Ceramic Substrate for Internet of Things (IoT) Applications”, Micromachines, vol. 11, 841, 2020"
},
{
"key": "ref5",
"doi": "10.1126/science.1182383",
"unstructured": "Rogers, J. A., Someya, T. & Huang, Y. Materials and mechanics for stretchable electronics. Science 327, 1603–1607 (2010)"
},
{
"key": "ref6",
"doi": "10.1039/c7lc00289k",
"unstructured": "Ma, Y., Feng, X., Rogers, J. A., Huang, Y. & Zhang, Y. Design and application of ‘Jshaped’ stress-strain behavior in stretchable electronics: a review. Lab Chip 17, 1689–1704 (2017)"
},
{
"key": "ref7",
"doi": "10.1002/anie.200703238",
"unstructured": "Baca, A. J. et al. Semiconductor wires and ribbons for high-performance flexible electronics. Angew. Chem. Int. Ed. 47, 5524–5542 (2008)"
},
{
"key": "ref8",
"unstructured": "Manoj Thakur et al., Flexible Electronic Skin, 4042 |International Journal of Current Engineering and Technology, Vol.4, No.6 (Dec 2014)"
}
],
"record": {
"registrant": "Longman Publishers",
"registered": "2026-09-12",
"updated": "2026-09-20",
"issue_number": 1,
"source": "crossref-api",
"source_agency": "Crossref (member 25296)"
}
}The Kernel Metadata Declaration
DOIMetadataKernel.xsd · namespace http://www.doi.org/2010/DOISchema · Attribute Value Sets 2.3 · draft — the agency's DOI name is filled in on accreditation
<?xml version="1.0" encoding="UTF-8"?>
<!-- DRAFT declaration: Smart Scholars is not yet a DOI Registration Agency. registrationAgencyDoiName is a marker (10.0/ is no RA's prefix) and is filled in on accreditation. -->
<kernelMetadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.doi.org/2010/DOISchema https://www.doi.org/doi_schemas/DOIMetadataKernel.xsd" xmlns="http://www.doi.org/2010/DOISchema">
<referentDoiName>10.46243/jst.2021.v6.i05.pp07-11</referentDoiName>
<primaryReferentType>Creation</primaryReferentType>
<registrationAgencyDoiName>10.0/smart-scholars-draft</registrationAgencyDoiName>
<issueDate>2026-10-04</issueDate>
<issueNumber>1</issueNumber>
<referentCreation>
<name primaryLanguage="en">
<value>Design, Structure and Fabrication of Exotic Flexible Materials in IoT and Wearable Application</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>10.46243/jst.2021.v6.i05.pp07-11</nonUriValue>
<uri returnType="text/html" doesContentNegotiation="true">https://doi.org/10.46243/jst.2021.v6.i05.pp07-11</uri>
<type>DOI</type>
</identifier>
<identifier>
<uri returnType="text/html">https://www.jst.org.in/index.php/pub/article/view/919</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/download/919/846</uri>
<type>URI</type>
</identifier>
<identifier>
<uri returnType="application/xml">https://www.jst.org.in/index.php/pub/article/download/919/2597</uri>
<type>URI</type>
</identifier>
<identifier>
<uri>https://www.jst.org.in/index.php/pub/article/view/919/846</uri>
<type>URI</type>
</identifier>
<structuralType>Digital</structuralType>
<mode>Visual</mode>
<character>Language</character>
<type>JournalArticle</type>
<principalAgent>
<name>
<value>Amita Agnihotri</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Shafali Jagga</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Shalini Singh</value>
<type>PrincipalName</type>
</name>
<role>Author</role>
</principalAgent>
<principalAgent>
<name>
<value>Longman Publishers</value>
<type>PrincipalName</type>
</name>
<role>Publisher</role>
</principalAgent>
<linkedCreation>
<name>
<value>Journal of Science & Technology</value>
<type>PrincipalTitle</type>
</name>
<identifier>
<nonUriValue>2456-5660</nonUriValue>
<type>ISSN</type>
</identifier>
<referentCreationRole>Part</referentCreationRole>
<referentCreationSequenceIdentifier>
<value>06</value>
<type>VolumeNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>05</value>
<type>IssueNumber</type>
</referentCreationSequenceIdentifier>
<referentCreationSequenceIdentifier>
<value>07-11</value>
<type>PageNumber</type>
</referentCreationSequenceIdentifier>
</linkedCreation>
<language>en</language>
<languageOfReferentContent>
<language>en</language>
<languageOfReferentContentType>Original</languageOfReferentContentType>
</languageOfReferentContent>
<creationDate>
<date>2021-09-14</date>
<creationDateType>PublicationDate</creationDateType>
</creationDate>
</referentCreation>
</kernelMetadata>
